Installation of protective wall panels
Measure the dimensions (length, width, height) on site and draw basic drawings by hand.
Based on the actual measured dimensions, use design software to create floor plans and construction drawings, calculate the required square meters of wall panels, the number of decorative lines, and related supporting facilities.
Installation of wall panels made of different materials
There may be slight differences in the installation of wall panels made of different materials, but they generally follow these four orders: first board and then line, from outside to inside, from bottom to top, and from top to wall.
Board first, line later: It refers to installing the main boards first, and then installing the lines. First, install extensively, and then handle details such as corners and edges.
From outside to inside: It refers to the installation sequence starting from the wall of the room entrance and moving inward. Because installation at the back requires cutting, installing from the outside in is more aesthetically pleasing.
From bottom to top: Install wall panels from bottom to top first.
Top first, then wall: It refers to installing the ceiling first and then installing the wall. When installing the ceiling, the keel should be fixed first, and the first wall protection panel should be fixed to the wall with steel nails before installation.
Product Display
Exhibition show
Certificate & honors
The first step is to accurately measure the length, width, and height of the site and create basic hand-drawn sketches to plan the layout.
Installing from the entrance moving inward ensures the most visible areas look perfect. Any necessary cutting of panels usually happens at the far end, which is more aesthetically pleasing.
Generally, you should follow the "board first, line later" rule. Install the main wall panels extensively first, then apply decorative lines to handle corners and edges.
The recommended sequence is "top first, then wall." You should fix the ceiling keel and finish the ceiling installation before fixing the wall protection panels.
By using design software to create floor plans based on your actual site measurements, you can precisely calculate the total square meters of panels and the required number of decorative lines.